Atec EMCP-MIG2000-6 - Manual (Page 3)

TECHNICAL SPECIFICATION E-MIG2000-6
2.2 Standards and applications
MIL-STD-461F, Department of Defense Interface Standard.
Requirements for the control of electromagnetic interference characteristics of subsystems and
equipment
MIL-STD-1275D – Department of Defense Interface Standard.
Characteristics of 28 Volt DC Eelctrical Systems in Military Vehicles.
Airbus A400M AMD24-C
DO160 Environmental conditions and Test Procedures for Airborne Equipment
Section17 – Voltage Spike
DO160 Environmental conditions and Test Procedures for Airborne Equipment
Section19 – Induced Signal Susceptibility
Euro Fighter SPE-J-000-E-1000. CS-EFA-4, Imported Transients conducted Susceptibility, Imported
Spikes and Transients, Time Domain, Power Lines.
2.3 Overview of the EMCP MIG2000-6 Test System
MIG2000-6 Module CS106 CS115REC CS116-10K10M CS11630M100M NAT
O
-SLOW
10u
NAT
O
-F
AST
-150n
F
x
-DO-160-S17
F
x
-DO-160-S19
F
x
-MIL1275
Fx-AMD24C CN-MIG-BT CN-MIG-BT2 CN-MIG-BT4 SYNCH-ADAPTER VERI-MIL2 VERI-50 VERI5 DC S17 CL
Standard
MIL-STD-461
CS106 X X X X
MIL-STD-461
CS115 X X X X
MIL-STD-461
CS116 10kHz X X X X
MIL-STD-461
CS116 100kHz X X X X
MIL-STD-461
CS116 1MHz X X X X
MIL-STD-461
CS116 10MHz X X X X
MIL-STD-461
CS116 30MHz X X X X
MIL-STD-461
CS116 100MHz X X X X
MIL-STD-1275 X
Euro Fighter
CS-EFA-4 X X X X X X X
Airbus
AMD24-C X X X X X
DO160
section 17 X X X X X
DO160
section 19 X
0 7 . 0 5 . 2 0 0 9 E M C P A R T N E R A G 3 / 1 4