Atec EMCP-MIG2000-6 - Manual

LARGEST RANGE OF IMPULSE TESTERS UP TO 100KV/100KA
0 7 . 0 5 . 2 0 0 9 E M C P A R T N E R A G 1 / 1 4
Technical Specification
E-MIG2000-6
revised: 07. May 2009
1 MIG Tester Type MIG2000-6
1 MIG Tester Type MIG2000-6 1
2 General 2
2.1 Brief description of the MIG2000-6 system 2
2.1.1 Serial Injection 2
2.1.2 Parallel injection 2
2.1.3 Impulse Synchronization 2
2.2 Standards and applications 3
2.3 Overview of the EMCP MIG2000-6 Test System 3
3 Generator circuit, wave shapes definitions 4
3.1 Wave shape definition MIL-STD-461F CS106 4
3.2 Wave shape definition MIL-STD-461F CS115 4
3.3 Wave shape definition MIL-STD-461F CS116 4
3.4 Wave shape definition MIL-STD-1275 5
3.5 Wave shape definition Euro Fighter CS-EFA-4 “Fast & Slow” 5
3.6 Wave shape definition Airbus AMD24-C 6
3.7 Wave shape definition DO160 section 17 6
3.8 Wave shape definition DO160 section 19 6
3.9 Mechanical dimensions, climatic conditions 7
4 Technical data 8
4.1 Voltage Spike waveform MIL-STD-461F CS106 8
4.2 Rectangular waveform MIL-STD-461F CS115 8
4.3 Damped oscillatory MIL-STD-461F, CS116 8
4.4 Ringwave MIL-STD-1275 9
4.5 Airbus AMD24-C 9
4.6 Euro Fighter Slow & Fast 10
4.7 DO160 section 17 10
4.8 DO160 section 19 10
5 Accessories and Options 11
5.1 System Accessories 11
5.2 Accessories to all MIG and TRA Testers 13
Introduction
The MIG2000-6 is available with a range of plug-in modules capable of generating damped oscillatory
and double exponential pulses in accordance with MIL-STD-461E: CS115, CS116 and other
standards. MIG2000-6 system comprises the impulse generator together with necessary injection
probes (couplers). Because this is a complete system, waveforms are guaranteed at the injection
point. The MIG "Modular-Impulse-Generator" is a flexible kit system, ready to quote tailored
generators for special test applications. The MIG is a further innovative solution from EMC PARTNER
AG to meet customer requests.
MIG generators are modern test equipment with the following features:
• Solid state impulse switch and solid state polarity change (no mechanical switch, no spark gaps or
tubes) - advantages: low jitter, no high frequency switching noise,
• Microprocessor menu controlled, printer port and RS232 remote control
• Safety in accordance with VDE 0104 (safety circuit, connector for warning lamp)
• Integrated peak measurement for voltage and current. Peak display and monitor output for v,i
• Windows software for PC control available. Software versions see EMCP web site
Manufacturers > EMC Partner
Categories > EMC Test Equipment > RTCA \ DO-160 > EMI \ EMC Equipment for Military Standards
EMC Partner MIG2000-6 Modular Impulse Generator Product Page
How-to Video