Atec EMCP-MIG2000-6 - Manual (Page 12)

TECHNICAL SPECIFICATION E-MIG2000-6
VERI50
50 ohm termination and
attenuator for system
verification according to
MIL-STD-461E.
VERI5
5 ohm termination and
attenuator for system
verification.
SYNCH ADAPTER
The Sync Adapter
generates the signal for the
Spike synchronisation. It
must be connected to the
„Auxiliary“ plug on the rear
panel of the MIG2000-6
generator.
DC-S17CL
10uF decoupling set for
voltage spike on power
supplies.
0 7 . 0 5 . 2 0 0 9 E M C P A R T N E R A G 1 2 / 1 4