Atec Agilent-4287A - Manual (Page 7)

Frequenc y > 1.8 GHz,
≤ 3 GHz
± 5 [%]
Oscillator level < –33 dBm
Frequenc y ≥ 1 MHz,
≤ 100 MHz
± 1 [%]
Frequenc y > 100 MHz,
≤ 500 MHz
± 1.2 [%]
Frequenc y > 500 MHz,
≤ 1 GHz
± 1.2 [%]
Frequenc y > 1 GHz,
≤ 1.8 GHz ± 2.5 [%]
Frequenc y > 1.8 GHz,
≤ 3 GHz ± 5 [%]
E
b
=
[%]
(| Z
x
|: Measurement value of |Z|)
E
c
=
[%] ( F: Frequency [MHz])
Z
s
= (Within ± 5 °C from the calibration temperature.
Measurement accuracy applies when the calibration
is performed at 23
°C ± 5 °C. When the calibration is
performed beyond 23 °C ± 5 °C, the measurement
accuracy decreases to half that described.)
Oscillator level ≥ –33 dBm,
Averaging factor ≥ 8
± (20 + 0.5 × F ) [mΩ] (F: Frequency [MHz])
Oscillator level
≥ –33 dBm,
Averaging factor < 7
± (50 + 0.5 × F ) [mΩ] (F: Frequency [MHz])
± (100 + 0.5 × F ) [m Ω] (F: Frequency [MHz])
Y
o
= (Within ± 5 °C from the calibration temperature.
Measurement accuracy applies when the calibration
is performed at 23
°C ± 5 °C. When the calibration is
performed beyond 23
°C ± 5 °C, the measurement
accuracy decreases to half that described.)
± (30 + 0.15 × F ) [µS] ( F: Frequency [MHz])
± (50 + 0.15 × F ) [µS] ( F: Frequency [MHz])
± (100 + 0.15 × F ) [µS] ( F: Frequency [MHz])
Z
s
Z
x
-------- Y
o
Z
x
• + 100 × ±
0.06
0.08 F
×
1000
------------------- +
±
( )
( )
Oscillator level
≥ –33 dBm,
Oscillator level
≥ –33 dBm,
Averaging factor
≥ 8
Oscillator level
≥ –33 dBm,
Averaging factor < 7
Oscillator level ≥ –33 dBm,
7
Basic Measurement Characteristics