Atec Agilent-4287A - Manual (Page 19)

19
General Characteristics
Other specifications
EMC European Council Directive 89/336/EEC
IEC 61326-1:1997+A1
CISPR 11:1990 / EN 55011:1991 Group 1, Class A
IEC 61000-4-2:1995 / EN 61000-4-2:1995
4 kV CD / 8 kV AD
IEC 61000-4-3:1995 / EN 61000-4-3:1996
3 V/m, 27-1000 MHz, 80% AM
IEC 61000-4-4:1995 / EN 61000-4-4:1995
1 kV power / 0.5 kV Signal
IEC 61000-4-5:1995 / EN 61000-4-5:1995
0.5 kV Normal / 1 kV Common
IEC 61000-4-6:1996 / EN 61000-4-6:1996
3 V , 0.15-80 MHz, 80% AM
IEC 61000-4-11:1994 / EN 61000-4-11:1994
100% 1cycle
NO TE-1: When tested at 3 V/m according to EN
61000-4-3:1996, the measurement accuracy will be within
specifications over the full immunity test frequency range of
27 to 1000 MHz except when the analyzer frequency is
identical to the transmitted interference signal test frequency.
NOTE-2: When tested at 3 V according to EN
61000-4-6:1996, the measurement accuracy will be within
specifications over the full immunity test frequency range of
0.15 to 80 MHz except when the analyzer frequency is
identical to the transmitted interference signal test frequency.
AS/NZS 2064.1/2 Group 1, Class A
Safety European Council Directive 73/23/EEC
IEC 61010-1:1990+A1+A2 / EN 61010-1:1993+A2
INSTALLATION CATEGORY II, POLLUTION
DEGREE 2
INDOOR USE
IEC60825-1:1994 CLASS 1 LED PRODUCT
CAN/CSA C22.2 No. 1010.1-92
Power requirement 90 V to 132 V, or 198 V to 264 V (automatically switched),
47 Hz to 63 Hz, 350 VA max.
Weight
Main unit 16 kg (SPC)
Test head 0.3 kg (SPC)
Dimensions
Main unit See Figure 9 through Figure 11
Test head See Figure 12