Atec Agilent-4287A - Manual (Page 15)

15
Standard conformity IEEE 488.1-1987,IEEE 488.2-1987
Available functions
(function code) SH1,AH1,T6,TE0,L4,LE0,SR1,RL0,PP0, DT1,DC1,C0,E2
Numerical data transfer format ASCII
Protocol IEEE 488.2-1987
Connector type 36 pin D-SUB connector
Signal type Negative logic, opto-isolated, open collector output
Output signal • BIN sort result (BIN 1 to BIN 13,
OUT_OF_GOOD_BINS)
• DC resistance pass/fail (DCR_OUT_OF_RANGE)
• Overload (OVLD)
• Alarm (ALARM)
• End of analog measurement (INDEX)
• End of measurement (EOM)
• Ready for trigger (READY_FOR_TRIG)
Input signal • External trigger (EXT_TRIG)
• K ey lock (KEY_LOCK)
Pin location See the follo wing figure. Refer to Programming
Manual for the definition of each pin.
Standard conformity 10 Base-T or 100 Base-TX (automatically switched),
Ethertwist, RJ45 connector
Protocol TCP/IP
Functions Telnet, FTP
Measurement Support Functions
Interface
GPIB
Handler interface
LAN interface