Atec Agilent-E4980A-AL - Manual (Page 2)

2
All specifications apply to the conditions of a 0 to 55 °C temperature range, unless
otherwise stated, and 30 minutes after the instrument has been turned on.
Specifications (spec.): Warranted performance. Specifications include guardbands to
account for the expected statistical performance distribution, measurement uncertainties,
and changes in performance due to environmental conditions.
Supplemental information is provided as information that is useful in operating the
instrument, but is not covered by the product warranty. This information is classified as
either typical or nominal.
Typical (typ.): Expected performance of an average unit without taking guardbands
into account.
Nominal (nom.): A general descriptive term that does not imply a level of performance.
When measurement conditions fall under multiple categories in a table, apply the best
value.
For example, basic accuracy Ab is 0.10% under the following conditions;
Measurement time mode SHORT
Test frequency 125 Hz
Test signal voltage 0.3 Vrms
The E4980A is the model number of the 20 Hz to 2 MHz frequency range LCR meter.
The E4980AL is the model number of the low frequency options (20 Hz to 300 kHz/
500 kHz/1 MHz) of the E4980A. This is a distributor preferred product and the model
number E4980AL is used only for ordering and shipment purpose. The actual unit of the
E4980AL is labeled as the E4980A (not E4980AL). See the E4980A/E4980AL
Configuration Guide (5989-8321EN) for more details.
Definitions
How to Use Tables
E4980A/E4980AL
Frequency range Model number and
option for ordering Model number and
option of products
20 Hz to 2 MHz E4980A E4980A
20 Hz to 1 MHz E4980AL-100 E4980A-100
20 Hz to 500 kHz E4980AL-050 E4980A-050
20 Hz to 300 kHz E4980AL-030 E4980A-030