Atec Agilent-4395A - Manual

Specifications describe the instrument's warranted performance over the temperature range of 0°C to 40°C
(except as noted). Supplemental characteristics are intended to provide information that is useful in applying
the instrument by giving non-warranted performance parameters. These are denoted as SPC (supplemental
performance characteristics)
, typical, or nominal. Warm up time must be greater than or equal to 30 minutes
after power on for all specifications.
Network Measurement
Source Characteristics
Frequency Characteristics
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Hz to 500 MHz
Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 mHz
Frequency reference
Accuracy
at 23 ± 5°C, referenced to 23°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <±5.5 ppm
Aging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <±2.5 ppm/year (SPC)
Initial achievable accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <±1.0 ppm (SPC)
Temperature stability
at 23 ± 5°C, referenced to 23°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <±2ppm (SPC)
Precision frequency reference (option 1D5)
Accuracy
at 0°C to 40°C, referenced to 23°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <±0.13 ppm
Aging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <±0.1 ppm/year (SPC)
Initial achievable accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <±0.02 ppm (SPC)
Temperature stability
at 0°C to 40°C, referenced to 23°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <±0.01 ppm (SPC)
Output Characteristics
Power range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –50 dBm to +15 dBm
Level accuracy
at 0 dBm output, 50 MHz, 23 ± 5°C, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±1.0 dB
Level linearity
Output Power Linearity 1
≥
–40 dBm ±1.0 dB
<
–40 dBm ±1.5 dB
1 at relative to 0 dBm output, 50 MHz, 23 ± 5°C
HP 4395A
Network/Spectrum/Impedance Analyzer
Technical Specifications