Atec Agilent-81624B User Manual
Page 7

7
81624B high performance and 81626B high power optical head specifications
All optical heads have to be operated with the single (Agilent 81618A) or dual (Agilent 81619A) Interface Modules
Agilent 81624B
Agilent 81624B
Calibration option
C01/C02
Agilent 81626B
Agilent 81626B
Calibration option
C01/C02
Sensor element
InGaAs, Ø5 mm
InGaAs, Ø5 mm
Wavelength range
800 nm to 1700 nm
850 nm to 1650 nm
Power range
–90 dBm to +10 dBm
–70 to +27 dBm (1250 nm to 1650 nm)
–70 to +23 dBm (850 nm to 1650 nm)
Applicable fiber type
Open beam
Standard SM and MM max 100 µm core size, NA ≤ 0.3
Parallel beam max Ø4 mm
Standard SM and MM max 100 µm core size, NA ≤ 0.3
Parallel beam max Ø4 mm
Uncertainty (accuracy) at
reference conditions
1
±2.2%
(1000 nm to 1630 nm)
±1.5%
(970 nm to 1630 nm)
±3.0%
(950 nm to 1630 nm)
±2.5%
(950 nm to 1630 nm)
Total uncertainty
2
±3.5% ±5 pW
(1000 nm to 1630 nm)
±2.8% ±5 pW
(970 nm to 1630 nm)
±5.0% ±500 pW
8
(950 nm to 1630 nm)
±4.5% ±500 pW
8
(950 to 1250 nm
max 23 dBm)
(1250 to 1630 nm
max 27 dBm)
Relative uncertainty:
7
- due to polarization
3
- spectral ripple
(due to interference)
4
≤ ±0.005 dB (typ. ±0.002 dB)
≤ ±0.005 dB (typ. < ±0.002 dB)
≤ ±0.005 dB (typ. ±0.002 dB)
≤ ±0.005 dB (typ. < ±0.002 dB)
Linearity (power):
5
- at 23 °C ±5 °C
- at operating temp. range
CW –70 dBm to +10 dBm, 1000 nm to 1630 nm
< ±0.02 dB
< ±0.05 dB
CW –50 dBm to +27 dBm, 950 nm to 1630 nm
< ±0.04 dB
8
< ±0.15 dB
8
Return loss
Typ. 60 dB
7
> 45 dB
> 47 dB
Noise (peak to peak)
6
< 5 pW
< 500 pW
Averaging time (minimal)
100 µs
100 µs
Analog output
Included
Included
Maximum safe input power
+16 dBm
+23.5 dBm (850 nm to 1650 nm)
+27.5 dBm (1250 nm to 1650 nm)
Dimensions (H x W x D)
57 mm x 66 mm x 156 mm
57 mm x 66 mm x 156 mm
Weight
0.5 kg
0.5 kg
Recommended recalibration period 2 years
2 years
Operating temperature
0 °C to 40 °C
0 °C to +35 °C
9
Humidity
Non-condensing
Non-condensing
Warm-up time
40 min
40 min
1. Reference Conditions:
• Power level 10 µW
(-20 dBm), continuous wave (CW)
• Parallel beam, 3 mm spot diameter on the
center of the detector
• Ambient temperature 23 °C ±5 °C
• On day of calibration (add ±0.3% for aging
over one year, add ±0.6% over two years)
• Spectral width of source ≤ 10 nm (FWHM)
• Wavelength setting at power sensor cor-
responding to source wavelength ±0.4 nm
2. Operating Conditions:
• Parallel beam, 3 mm spot diameter on the
center of the detector or connectorized fiber
with NA ≤ 0.2 (straight connector, options
C01/C02 also with angled connector ≤ 8°)
• For NA > 0.2 add 1%
• Averaging time 1 s
• Within one year after calibration,
add 0.3% for second year
• Zeroing required
3. All states of polarization at constant wave-
length (1550 nm ±30 nm) and constant
power, straight connector, T = 23 °C ±5 °C.
For angled connector (8°) add ±0.01 dB typ.
4. Conditions:
• Wavelength 1550 nm ±30 nm,
fixed state of polarization
• Temperature 23 °C ±5 °C
• Linewidth of source ≥ 100 MHz
• Angled connector 8°
5. Does not include noise; zeroing required
6. Averaging time 1 s, T = 23 °C ±5 °C,
ΔT ±1 °C, observation time 300 s.
Wavelength range 1200 nm to 1630 nm
7. Conditions:
• Wavelengths 1550 nm ±30 nm
• Standard single mode fiber, angled
connector min 8°
• With D-shape adapter 81001xx
return loss > 60 dB typical
8. For input power > +10 mW:
• Add typ. ±0.0016 dB/mW, or in case of
options C01/C02 for wavelength ≤ 1550 nm
add ±0.0006 dB/mW (guaranteed) using
adaptor Agilent 81000AF
• In case of decreasing power, allow
time for stabilization of the reading
(about 5 s per dB change)
• In case of decreasing power by more than
50 dB, allow recovery time of 3 minutes.
9. Max 30 °C above +20 dBm input power