Alpha Technologies LPE Enclosure - Manual (Page 25)

031-302-B0-001 Rev A
25
2.0 Installation, continued
2.6 Battery Installation
The following precautions must be observed when maintaining batteries:
• Remove all personal metal objects (watches, rings, etc.).
• Use insulated tools.
• Wear eye protection and rubber gloves.
• Observe circuit polarities.
• Do not make or break live circuits.
• Do not lay metal tools and hardware on top of the batteries.
The batteries are enclosed in cabinets with limited access. Again, extreme caution must be exercised
when maintaining and collecting data on the battery system.
Battery Identification
Each battery contains a DATE CODE usually located on a sticker between the battery posts. This
date code must be recorded in the battery’s maintenance log. If batteries other than those installed by
Alpha are used, consult the battery’s documentation for date code type and placement.
Battery systems represent a risk of electrical shock and high short circuit currents.
WARNING!
Battery Date Code located in this box
(1210 = DEC. 2010)
1 2 1 0
Fig. 2-9, Battery Identification Label