Alpha Technologies LPE Enclosure - Manual (Page 23)

031-302-B0-001 Rev A
23
6. Replace SPI cover and reinstall the screws.
7. Verify switch on top of SPI is in the ON position.
5. Insert coaxial termination fully inside Seizure Screw assembly and tighten
Seizure Screws to 35 Inch-Pounds to prevent arcing and failure of unit.
2.0 Installation, continued
2.5 Connecting the Utility Power, continued
2.5.2 Connecting Coaxial Cable, continued
Fig. 2-18, Cover Replaced,
SPI Switched On
6
7
ALT ON
6
6