Alpha Technologies Cordex 48-1kW 23 4000W - Manual (Page 9)

A RGUS T ECHNOLOGIES C ORDEX 48-1 K W 23" S HELF FOR S YSTEMS UP TO 4000W WITH D ISTRIBUTION
2 I NSPECTION
2.1 Packing Materials
All Argus products are shipped in rugged, double walled boxes and suspended via solid inserts to minimize shock
that may occur during transportation. Packaging assemblies and methods are tested to National Safe Transit
Association standards.
Products are also packaged with Cortex. This plastic wrap contains a corrosive-inhibitor that protects the system
from corrosion for up to two years.
2.1.1 Returns for Service
Save the original shipping container. If the unit needs to be returned for service, it should be packaged in its
original shipping container. If the original container is unavailable, make sure the unit is packed with at least three
inches of shock-absorbing material to prevent shipping damage. Argus Technologies is not responsible for
damage caused by the improper packaging of returned units.
2.2 Check for Damage
Prior to unpacking the equipment, note any damage to the shipping container. Unpack the equipment and inspect
the exterior for damage. If any damage is observed contact the carrier immediately.
Continue the inspection for any internal damage. In the unlikely event of internal damage, please inform the
carrier and contact Argus Technologies for advice on the impact of any damage.
Verify that you have all the necessary parts per your order for the proper
assembly of your system.
030-704-C0
R EV A P AGE 3 OF 14