Alpha Technologies Cordex 48-1kW 23 4000W - Manual (Page 23)

Argus Technologies Ltd. 010-566-C0 Rev C WC
Printed in Canada. © 2005 Argus Technologies Ltd. ARGUS and CORDEX are trademarks of Argus Technologies Ltd. All Rights Reserved. Page 1 of 11
1 Introduction
1.1 Scope of the Manual
This instruction manual explains the features of Argus Technologies’ switched mode rectifier Cordex 48-1kW.
NOTE: An explanation of the installation, interconnection and operation will provided with the Cordex System Shelf and
Controller (CXC) manuals.
1.2 Product Overview
The Cordex 48-1kW Rectifier modules use a high frequency, switched mode conversion technique to provide a
fully regulated and isolated DC output from the AC mains. Rectifier power modules are “hot swappable” meaning
they can be inserted or removed from the shelf without cutting power to or from the system or the load. Additional
power modules can be included with the system at the time of ordering or added after the shelf has been
installed.
A complete Cordex rectifier system consists of one or more power modules in a common shelf enclosure. The
shelf has connections for AC inputs, DC output, and system communications.
Figure 1–Front view of Cordex 48-1kW rectifier
1.3 Part Numbers and List Options
This product is available to order under the following part numbers and list options:
Description Part Number/List Option
Cordex 48-1kW rectifier power module......................................................................................................010-566-20
Basic module...................................................................................................................................................... *List 0
Gray finish with blue silkscreen........................................................................................................................ *List 50
* Default option
The above information is valid at the time of publication. Consult factory for up-to-date ordering information.