ABUS TVIP82x00 Operating instructions - Manual (Page 122)

122
English
To save a schedule for motion- controlled recording, click on “Edit”.
A new window appears. Specify here on which days of the week and at which times motion-controlled
recording should take place.
Now select a week day for motion controlled recording. To store particular time periods, enter a start and
end time. To set up all-day motion-detection, select 00:00 as the start time and 24:00 as the end time.
To apply motion detection for all week da ys, click the “Select All” checkbox. To copy motion detection to
other week days, select the week day and click on “Copy”.
To apply the changes, click “OK” and to discard them click on “Cancel”.
Apply the settings made with “Save”.
Linkage Method
Make the setting here for which action motion detection should be performed.
Normal Linkage
Send Email: You receive an e-mail as notification, activate the checkbox for this to be performed.
Upload to FTP: Activate the checkbox to upload the motion-controlled recording to an FTP server.
Other Linkage
You have the opportunity of triggering alarm outputs when motion is detected.
Click on “Select All” to switch on both alarm outputs. To switch on alarm output 1, select “A->1”, to switch
on alarm output 2, sel
ect “A->2”.
Apply the settings made with “Save”.