ABUS TVIP82x00 Operating instructions - Manual (Page 112)

112
English
11.3.5.1 Display Settings
You can use this menu item to set the picture quality of the Speed Dome, including brightness, sharpness,
contr
ast and so on. Click on “Default” to restore the default values.
Please note:
The display setting parameters can vary depending on the model.
Brightness
Image brightness settings. A value between 0 and 100 can be set.
Contrast
Image contrast settings. A value between 0 and 100 can be set.
Saturation
Image saturation settings. A value between 0 and 100 can be set.
Limit Gain
Setting for the maximum limit gain. A value between 0 and 100 can be set.
Sharpness
Image sharpness settings. A higher sharpness value can increase image noise.
A value between 0 and 100 can be set.
Focus Mode
For the focus mode, the options “Auto”, “Manual” and “Semi-auto” are available.