Cla-Val 834-05 - Manual (Page 8)

FLOW FACTORS
CV (gpm)
340
885
1667
2424
KV
77.3
201
379
550
SIZE (IN)
4”
6”
8”
*10”
Cla-Val 800 Series Control Valves operate with maximum efficiency when mounted in horizontal or vertical piping. We recommend isolation valves
be installed on inlet and outlet for maintenance. Adequate space above and around the valve for service personnel should be considered essential.
A regular maintenance program should be established based on the specific application data. However, we recommend a thorough inspection be
done at least once a year. Consult factory for specific recommendations.
PO Box 1325 Newport Beach CA 92659-0325 Phone: 949-722-4800
Fax: 949-548-5441 Web Site: cla-val.com E-mail: [email protected]
CLA-VAL
CLA-VAL CANADA CLA-VAL EUROPE
4687 Christie Drive
Beamsville, Ontario
Canada LOR 1B4
Phone: 905-563-4963
Fax: 905-563-4040
E-Mail: [email protected] Chemin des M ésanges 1
CH-1032 Romanel/
Lausanne, Switzerland
Phone: 41-21-643-15-55
Fax: 41-21-643-15-50
E-Mail: [email protected]
Copyright CLA-VAL 2008 Printed in USA Specifications subject to change without notice.
CLA-VAL UK
Dainton House, Goods Station Road
GB - Tunbridge Wells
Kent TN1 2 DH England
Phone: 44-1892-514-400
Fax: 44-1892-543-423
E-Mail: [email protected]
©
Represented By:
E-800GS (R-1/08)
Dimensions Model 800GS
T - 3 T - 3
T - 1
T - 2
T - 2
T - 1
"L"
"D"
FLOW
4
17.25
9.5
1/2
2
151
8
20.00
14.00
1/2
2
285
10
22.00
16.00
1/2
2
330
6
18.25
11.75
1/2
2
196
Valve Size (Inches)
L
D
T-1/T-2 (NPT)
T-3 (NPT)
Approx. Wt. (Lbs.)
100
438
241
1/2
2
68
200
508
356
1/2
2
129
250
559
406
1/2
2
150
150
464
299
1/2
2
89
Valve Size (mm)
L
D
T-1/T-2 (NPT)
T-3 (NPT)
Approx. Wt. (kgs)
MAIN VALVE
Ends: Flanged ANSI B16.5 (150lb Class)
Body: Cast Steel (ASTM A216 WCB)
Tube Diaphragm: Nitrile Rubber
Barrier: Urethane
Bolts: 316 SS
Pressure: 250 psig (17.24 BAR)
Temp. Range: 32º F to 180º F (0º C to 82.2º C)
MAIN VALVE OPTIONS
Body: Nickel Aluminum Bronze
(Alloy C95800) or
Duplex SS (Alloy 2205)
PILOT VALVE
All Parts: 316 SS
O-Rings: Nitrile Rubber
Control Range: 20 to 250 PSIG
Pilot Pressure Range: 20 to 250 PSIG
Operation: Latches in operated position;
manual reset
PILOT VALVE OPTIONS
All Parts: Monel (Alloy 400)
Operation: Non-latching
FLOW
T - 1 (TYP BACK SIDE) T - 1 (TYP BACK SIDE)
When Ordering Please Specify:
1. Catalog No. 800GS 2. Valve Size 3. Fluid Being Handled 4. Fluid Temperature Range 5. Inlet Pressure Range
6. Outlet Pressure Range 7. Maximum Differential Pressure 8. Minimum Differential Pressure 9. Maximum Flow Rate
4”, 6”, 8” Factory Mutual Approved
(with approved Pilot Components)
* Calculated