Cla-Val 834-05 - Manual (Page 19)

MAINTENANCE/SPARE PARTS LIST
Please order parts as a kit, from Cla-Val kIT.
Kit consists of the items below.
PART NAME MATERIAL QTY
Retainer Ring
316SS 1
O-Ring Buna-N ® 1
O-Ring Buna-N ® 1
O-Ring Buna-N ® 1
O-Ring Buna-N ® 5
Spring 302 SS 1
Spacer Urethane 1
Note: All O-rings are manufactured by Parker O-ring.
Lubricant & Sealant Suppliers
*Swak ® Anaerobic Pipe Thread Sealant with TFE available from:
Swak ® is a registered trademark of Swagelok Company.
Swak ® is available from the independent distributors of
Swagelok, and can be purchased online at www.swagelok.com
Part Number: MS-PTS-50
**Molykote 33 available from:
Dow Corning
Midland, MI 48686-0994
***Parker S-Lube 884-2 is available from:
Parker Seal
Lexington, Kentucky
The above may be purchased from Cla-Val
The Cla-Val Model is a pilot operated, three (3) way, two (2) position,
Normally closed, high flow capacity, manual reset flow control valve. Manual
Reset Relays require a physical position change of the knob/stem assem-
bly to achieve the in-service status. The knob must be pulled outward once
pilot supply pressure is applied to maintain the operating position.
BILL OF MATERIAL
ITEM PART NAME MATERIAL
1. Retainer 316 SS
2. Piston 316 SS
3. Spacer Urethane
4. Stem 316 SS
5. O-Ring (1) Buna-N ®
6. O-Ring (5) Buna-N ®
7. Knob Urethane
8. O-Ring Buna-N ®
9. Retainer Ring 316 SS
10. O-Ring Buna-N ®
11. Spring 302 SS
12. Body 316 SS
CLA - VAL
copyright Cla-Val 2003 Printed in USA Specifications subject to change without notice.
P.O. Box 1325 • Newport Beach, CA 92659-0325 • Phone: 949-722-4800 • Fax: 949-548-5441 • E-mail: [email protected] • Website cla-val.com
©
PL- Latching Deluge Pilot (R-3-04)
PARTS LIST
PS
IN OUT EXH
8 9 10 11 12 13
4 1 2 3 5 6 7
CMDL
MODEL
Latching Deluge Pilot