Gotham 10 PDPF High Elevations Baffle SpecSheet User Manual
10” pdpf
![background image](/manuals/312895/1/background.png)
Luminaire Type:
Catalog Number
(autopopulated):
© 2008-2012 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 11/19/12. Specifications subject to change without notice.
PAGE 1 OF 3
PDPF-10-XBAFFLE
Gotham Architectural Downlighting
Compact Fluorescent Surface Downlights
10” PDPF
High Elevations
®
Performance Downlight Cross Baffle Pendant
Horizontal Triple-Tube Lamp
DECORATIVE HOUSING
•
Durable, heavy-gauge aluminum housing allows for a dedicated optical system
with unparalleled performance. Textured polyester powder paint finish available
in matte black, satin silver or white.
•
Upper ballast module houses all gear, including available emergency battery pack.
OPTICAL SYSTEM
•
Self-flanged, semi-specular or matte-diffuse reflector. Patented Bounding Ray™
Optical Principle design (U.S. Patent No. 5,800,050) provides lamp before
lamp image and smooth transition from top of the reflector to bottom. Reflector
flange visually integrates with housing.
•
Cross baffle offers superior cut-off with a clean aperture appearance.
MOUNTING OPTIONS
•
PM - Pendant-mount entry provided for 3/8” National Pipe Thread stem. Swivel
mounting accessories available (see stem options).
•
ACC - Aircraft cable and cord mount provided with 10ft. aircraft cable and
black cord.
ELECTRICAL SYSTEM
•
Horizontally mounted, positive-latch, thermoplastic socket(s).
•
Class P, thermally protected high-power-factor electronic ballast(s).
LISTING
•
Fixtures are UL listed for damp locations. Listed and labeled to comply with
Canadian standards.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: PDPF 3/32TRT 10CB MVOLT BL ACC
Series
# of lamps
Wattage/Lamp
Aperture/Trim color
Finish
Lens type
Voltage
Color
4
PDPF
1/
2/
3/
26TRT
32TRT
42TRT
57TRT
1
10CB
2
Clear
(blank)
Semi-specular
LD
Matte-diffuse
(blank)
No lens
CGL
Clear glass lens
T73
Tempered prismatic lens
MVOLT
3
120
277
347
BL
Matte black
SS
Satin silver
WH
White
Mounting
Stem options
Ballast
8
Options
PM
5
Pendant
3/8”
thread
mount
ACC
6
Aircraft
cable
and cord
CYS
7
3/8” stem
and canopy
with 5° “hang
straight”
swivel
CRS
7
3/8” stem and
canopy with
45° swivel
(blank)
Electronic ballast
ECOS
9
EcoSystem
®
electronic dimming ballast. Minimum dim-
ming level 5%.
ADEZ
10
Advance Mark 10
®
electronic dimming ballast. Minimum
dimming level 5%.
ADZT
10
Advance Mark 7
®
electronic 0-10VDC dimming ballast.
Minimum dimming level 3%.
S5 HW
10,11
Simply5™ electronic dimming system ballast less Reloc
DS
12
Dual switching
GMF
13
Single slow-blow fuse
GLR
13
Single fast-blow fuse
EL
10
Emergency battery pack with integral test switch.
1-lamp, 42W maximum
EL2LP
10
Emergency battery pack with integral test switch and
2-lamp emergency operation. 2-lamp, 32W maximum
WLP
With 3500 K lamp (shipped separately)
ACCESSORIES order as separate catalog numbers (shipped separately)
nSP5 D
Sensor Switch
®
nLight
®
0-10V dimming relay. Requires additional nLight bus power supply (nPS 80)
ORDERING NOTES
1.
Available in 1 or 2 lamp only.
2.
Consult factory for additional reflector options.
3.
Multi-volt electronic ballast capable of operating on any line voltage from 120V
through 277V, 50 or 60Hz.
4.
Additional architectural colors available; see
www.lithonia.com/archcolors
.
5.
Available with CYS or CRS stem option only.
6.
Provided with 10ft. aircraft cable and black cord. White cord standard when
white pendant is ordered. Consult factory for additional lengths.
7.
For use with pendant mount (PM) units only. Length of stem must be specified
(from 12” to 48” in 2” even increments). EX: CYS12. Stems greater than 48”,
up to 240”, provided with couplers. Consult factory for exterior use.
8.
For additional ballast types, refer to
9.
Not available with ACC mounting.
10. Available in 120V or 277V only.
11. Not available with 57TRT.
12. Standard on 3-lamp fixtures. Stem required for DMHL and S5 HW.
13. Not available with MVOLT. Must specify voltage.
14. Sensor Switch
®
5A relay with one 0-10 VDC dimming output. Requires
additional nLight bus power supply.
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
N
OT
ES