Extron Electronics System 4xi Series - Manual (Page 34)

Extron • System 4 xi Switcher Series • User’s Manual
Chapter 3 • Using the System 4
xi
Front Panel
3-11
Horizontal Shift Control
This is for line doubled/line quadrupled signals only.
Press H S
HIFT to bring up this menu. The current Horizontal Shift setting will be
displayed. Use or to change the setting, while observing the projector/
monitor screen. (Range: -62 to +62).
Press to save the new setting.
Press H S HIFT again to exit and return to the default screen.
To exit without saving, press H S HIFT again (without pressing ), or use one
of the other procedures above.
Contrast Control
Press C ONT to display this menu. The current Contrast setting will be displayed.
Use or to change the setting, while observing the projector/monitor screen.
(Range: -62 to +62).
Press to save the new setting.
Press C ONT again to exit and go to the default screen.
Color Control
Press C OLOR to display this menu. The current Color level will be displayed.
Use or to change the setting, while observing the projector/monitor screen.
(Range: -62 to +62).
Press to save the new setting.
Press C OLOR again to exit and go to the default screen.
Tint Control
Press T
INT
to display this menu. The current Tint (Hue) level will be displayed.
Use or to change the setting, while observing the projector/monitor screen.
(Range: -62 to +62).
Press to save the new setting.
Press T
INT
again to exit and go to the default screen.
Detail Control
This control is only on the System 4LD xi and 4LQ xi
Press D
ETAIL
to display this menu. The current Detail (Sharpness) setting will be
displayed. Use or to change the setting, while observing the projector/
monitor screen. (Range: 1 to 4).
Press to save the new setting.
Press D
ETAIL
again to exit and go to the default screen.