Extron Electronics PA 300 - Manual (Page 8)

PA 300 Peaking Amplifier • Introduction
Introduction
1-2
About this Manual
This manual contains information about the Extron PA 300
peaking amplifier, and includes information on how to install,
operate and troubleshoot the unit.
About the PA 300
The PA 300 is an ultra high performance RGB peaking amplifier
capable of driving a 1600 x 1200 resolution computer signal
over 600 feet (185 m) using Extron Mini HR cables, or 1000 feet
(300 m) using Extron RG6 cable. The PA 300 is compatible with
both RGB and HDTV component signals.
The PA 300 has one gain potentiometer and two peaking
potentiometers on the front panel. On the rear panel, the
PA 300 provides five BNCs for RGBHV input and five BNCs for
RGBHV output. The unit restores the sync signals, but does not
process them for format, polarity, or delay.
The PA 300 is housed in a 1U, half rack, 6" (15.2 cm) deep,
2-piece enclosure, and uses an internal power supply.
Features
Bandwidth — 350 MHz (-3 dB) RGB video bandwidth, fully
loaded.
Gain and peaking control — allows optimized output
compensation for various cable lengths and applications.
Light and compact metal enclosure — 1U, half rack, 6" (15.2 cm)
deep, 2-piece enclosure.
Versatile mounting options — can be set on a table; mounted
on a rack shelf; or mounted through or under a desk,
podium, or tabletop.
Global accessibility — has a universal internal power supply
that allows for worldwide usability.