beautypg.com

Specifications, Specifications, part numbers, and accessories, Video – Extron Electronics PA 300 User Manual

Page 22: Video input, Video output

background image

PA 300 Peaking Amplifier •

Specifications, Parts, Accessories

Specifications, Part Numbers, and Accessories

Specifications

Video

Gain ................................................ -2.5 to +3.5 dB (x0.75 to x1.4), adjustable;

default = 0 dB

Peaking/equalization
Low frequency ............................... 0 to 4 dB at 10 MHz, adjustable
High frequency .............................. 0 to 15 dB at 120 MHz, adjustable
Bandwidth ..................................... 350 MHz (-3 dB)
Output cable driving distance ..... Up to 600' (185 m) with Extron Mini HR

cable. Up to 1000' (300 m) with Extron

RG6 or RG 59 cable (tested with a

1600x1200, 60 Hz computer video signal)

Video input

Number/signal type .................... 1 analog RGBHV, RGBS, RGsB, RsGsBs,

component video (interlaced, progressive,

HDTV), S-video, composite video

Connectors ..................................... 5 BNC female
Nominal level ................................ 1.0 Vp-p for Y of component video and

S-video and for composite video

0.7 Vp-p for RGB (excluding sync) and for

R-Y and B-Y of component video

0.3 Vp-p for C of S-video

Minimum/maximum levels ........ Analog: 0.4 V to 2.0 Vp-p with no offset at

unity gain

Impedance ...................................... 75 ohms
Horizontal frequency .................... 15 kHz to 150 kHz
Vertical frequency .......................... 40 Hz to 140 Hz
Return loss ..................................... -30 dB @ 0 to 5 MHz
DC offset (max. allowable)........... 1 V

Video output

Number/signal type ..................... 1 analog RGBHV, RGBS, RGsB, RsGsBs,

component video (interlaced, progressive,

HDTV), S-video, composite video

Connectors ..................................... 5 BNC female
Nominal level ................................ 1.0 Vp-p for Y of component video and

S-video, and for composite video

0.7 Vp-p for RGB (excluding sync) and for

R-Y and B-Y of component video

0.3 Vp-p for C of S-video

[excluding sync when gain and peaking

potentiometers are set to unity gain

(follows input)]

A-2