Extron Electronics LANCIAxi User Guide User Manual
Page 9
Extron • SENTOSA
xi
LQ & LANCIA
xi
LD • User’s Manual
Page 1-2
Introduction to the SENTOSA
xi
xi
xi
xi
xi
LQ & LANCIA
xi
xi
xi
xi
xi
LD
Features unique to the Lancia
xi
xi
xi
xi
xi
LD include the following.
•
Line doubler - Doubles the resolution of standard video from 525
interlaced lines at 15 kHz to 525 non-interlaced lines at 31.5 kHz for
a clearer, brighter output.
•
Demo-mode - Built-in “demo mode” allows split screen of video
and line doubled video side by side.
•
VGA mode - Conveniently converts video signals to 480 lines of
non-interlaced VGA. This VGA output allows you to plug directly
into digital display devices for RGBHV signal transmission.
Features of Sentosa
xi
and Lancia
xi
include the following.
•
Quad-standard decoder - Sentosa
xi
and Lancia
xi
are compatible
with all international video formats including NTSC 3.58, NTSC
4.43, PAL and SECAM.
•
Motion mode compensation - With motion mode compensation,
the Sentosa
xi
and Lancia
xi
virtually eliminate the “jaggies” found in
line quadrupled or line doubled video.
•
Picture controls - Picture controls include color, hue (tint),
horizontal shift and contrast for each input. The Sentosa
xi
and
Lancia
xi
will save picture controls for each of the two inputs.
•
RS-232 control - A rear panel RS-232 serial port provides access
for a third-party remote control system.
•
Input sync detection - In auto-switch mode the input with a signal
present is automatically selected, perfect for the video loop-back
feature of the System 8 and 10 PLUS switchers.
•
Universal compatibility - Outputs either RGsB, RGBS or RGBHV
signals at 31.5 kHz for the Lancia
xi
and 63 kHz for the Sentosa
xi
.
•
Output sync polarity - Sync polarity can be adjusted through rear
panel DIP switches (positive or negative H&V) to allow for any
projector to recognize the Sentosa
xi
or Lancia
xi
input versus a
standard VGA input and save different convergence, brightness
and contrast settings.
•
Rack mountable - The Sentosa
xi
and Lancia
xi
fit into a 1U high,
1/2 rack width metal enclosure.