Extron Electronics Chapter One - Manual (Page 8)

Lancia
xixixixixi
• Installation
Installation, cont’d Installation
Installation Overview
T
o
install and set up the Lancia
xi
line doubler for operation,
follow these steps:
1
T
urn of
f all of the equipment. Ensur
e that the video
sour
ces (DVD players, laser
disc players, VCRs, satellite
receivers, or other devices), the Lancia
xi
, and the output
display device ar
e all turned of
f and disconnected fr
om
the power sour
ce.
2
Mount the Lancia
xi
. See “Mounting the Lancia
xi
Line
Doubler” in this chapter
.
3
Attach the cables. See “Rear Panel Cabling” in this chapter
.
4
Connect power cor
ds and turn on the display device and
the input devices, in that or
der
.
5
Set the r
ear panel DIP and sync switches. See “Rear Panel
Contr
ols” in chapter thr
ee.
6
Select an input and adjust the pictur
e contr
ols on the fr
ont
panel. See “Fr
ont Panel Contr
ols and Indicators” in
chapter thr
ee.
Mounting the Lancia
xixixixixi
1
.
For optional rack mounting, mount the Lancia
xi
on the left
or right side of a 19" 1U Universal Rack Shelf (Extr
o
n
part #
60-190-01
) (figur
e 2).
4-40 X 1/8 Scre
ws
Use 2 Mounting Holes
on Opposite Cor
ners
F
alse F
ront P
anel
Uses 2 F
ront Holes Only
Figure 2 — Rack mounting the Lancia
xixixixixi
a
.
If feet wer
e pr
eviously installed on the bottom of the
case, r
emove them.
2-2
Lancia
xixixixixi
• RS-232/Remote Control
COMMAND/RESPONSE TABLE
Description
Command Response Notes
ASCII HEX to host
Input selection
Select input
X1
2! 32•21 C2 Select input 2
Picture controls
Freeze on
F 7C Frz1 Freeze (frame) video
Freeze off f 7E Frz0 Release freeze mode
Set color value to X2 X2 C X2 43 Col X2 Set color value to X2
Increment color value {C 7B 43 Col X2 Previous color value +1
Decrement color value }C 7D 43 Col X2 Previous color value -1
Set tint value to X2 X2 T X2 54 Tin X2 Set tint value to X2
Increment tint value {T 7B 54 Tin X2 Previous tint value +1
Decrement tint value }T 7D 54 Tin X2 Previous tint value -1
Set contrast value to X2 X2 ^ X2 5E Con X2 Set contrast value to X2
Increment contrast value {^ 7B 5E Con X2 Previous contrast value +1
Decrement contrast value }^ 7D 5E Con X2 Previous contrast value -1
Horizontal shift
Set H shift value to
X6 X6 H X6 48 Hph X6 Set horizontal shift value to X6
Increment H shift value {H 7B 48 Hph X6 Previous horizontal shift value +1
Decrement H shift value }H 7D 48 Hph X6 Previous horizontal shift value -1
Information, part number, and firmware requests
Information request
I/i 49/69 C X1 •T X4 •Col X2 •Tin X2 •Con X2 •Hph X6 •Frz X3 Input 2; NTSC 3.58; color — 165;
C2•T1•Col65•Tin70•Con100•Hph39•Frz0 tint — 70; contrast — 100;
H shift — 39; freeze off
Request for part number N/n 4E/6E N60-213-01 60-213-01 = Lanciaxi
Query software version Q/q 51/71 QVER• X5 Software version X5
4-5