Extron Electronics MPX 423 A - Manual (Page 43)

5-3 MPX 423 A • Ethernet Control
PRELIMINAR
Y
The switcher checks several possibilities, in the following order, and then
responds accordingly:
a. Does the address include a specific file name, such as
10.13.156.10/file_name.html? If so, the switcher downloads that page.
b. Is there a file in the switcher’s memory that is named “index.html”?
If so, the switcher downloads “index.html” as the default start-up
page.
c. If neither of the above conditions is true, the switcher downloads the
factory-installed default start-up page, “nortxe_index.html”
(figure 5-2), also known as the System Status page.
Navigating the Default Web Pages
The MPX 423 A default Web pages include four tabs (Status, Configuration, File
Management
, and Control) for easy navigation of the administrative options
including system status, password control, file management, and video/audio
settings.
Status tab
The Status tab includes pages that show the current System Status and DSVP data
for the MPX 423 A.
System Status page
The System Status page (figure 5-2), is the default page of the on-board Web server,
and provides an overview of the matrix switcher’s status. It provides immediate
system information, power status, and serial port settings for the MPX.
Figure 5-2 — System Status page