Extron Electronics IN1502 Setup Guide - Manual (Page 16)

Refer also to the IN1502 User’s Manual at www.extron.com.
Output Configuration
The following flowchart provides an overview of the Output
Configuration submenus and options for each setting.
OUTPUT
CONFIG
NEXT
1024 x 768 @60 Hz H SYNC V
NEG POS
H FORMAT
HV
NEXT NEXT
PICTURE
CONTROL
MENU
Scaler output rates
• See the scaler output table. All
resolutions available at 50 and
60 Hz.
Default: 1024 x 768 @60 Hz
Sync polarity
• H- / V- (default)
• H- / V+
• H+ / V-
• H+ / V+
Sync output format
• H (default) – Separate
• HV – Composite
MENU
Default
Cycle
NEXT
RES REFRESH
Resolution and refresh rates
Rotate the horizontal Adjust ([) knob while in this submenu
to select one of the available combinations of output resolution
rates.
Rotate the vertical Adjust ({) knob while in this submenu to
select one of the available refresh (vertical scanning) rates.
Scaler Output Resolutions @ 50/60 Hz
640 x 480 • 1024 x 768 •
800 x 600 • 1280 x 768 •
848 x 480 • 1360 x 765 •
852 x 480 • 1366 x 768 •
N Default is 1024 x 768 @ 60Hz
Sync polarity
The display or projector may require a specific combination of
horizontal (H) and vertical (V) sync signal polarities. Rotate
either adjust knob to select the appropriate sync polarity
combination.
H format
The display or projector may require separate horizontal and
vertical sync or composite (combined horizontal and vertical)
sync. Rotate either adjust knob to select "HV" for composite
sync or "H" to output horizontal and vertical sync separately.
IN1502 • Front Panel Operation
Front Panel Operation, cont’d
2-6