Adapters, Mounting the units, Tabletop use – Extron Electronics FOXBOX Tx_Rx HDMI User Guide User Manual
Page 47: Mounting, Tabletop use mounting
Bulk fiber cable and termination tools
RG6 Super High Resolution Cable
Part Number
OM4 MM P/2K Plenum 2 km (6,562 foot) Spool
22-225-02
SM P/2K Plenum 2 km (6,562 foot) Spool
22-223-02
Fiber Optic Termination Kit Termination Kit
100-656-01
QLC MM/10 Multimode, qty. 10
101-018-01
QLC SM/10 Singlemode, qty. 10
101-017-01
Adapters
Accessories
Part number
HDMIF-DVIDM
HDMI female to DVI-D male adapter
26-616-01
HDMIM-DVIDF
HDMI male to DVI-D female adapter
26-617-01
Mounting the Units
ATTENTION: Installation and service must be performed by authorized personnel only.
Either of the 1-inch high, quarter-rack width (transmitter) or half-rack width (receiver) units
can be placed on a tabletop, mounted on a rack shelf, or mounted under or through a desk
or other furniture. The receiver can be mounted to a projector bracket.
Tabletop Use
Affix the four included rubber feet to the bottom of the unit and place it in any convenient
location.
Mounting
If desired, mount the unit using any of the following optional kits:
•
RSU 126 6-inch deep universal rack shelf kit (part number 60-190-10)
•
RSB 126 6-inch deep basic rack shelf (part number 60-604-11)
•
RSU 129 9.5-inch deep universal rack shelf kit (part number 60-190-01)
•
RSB 129 9.5-inch deep basic rack shelf (part number 60-604-02)
•
MBB 100 Back of the rack mounting kit (part number 70-367-01)
•
MBU 125 under-desk mounting kit (part number 70-077-01)
•
MBD 129 through-desk mounting kit (part number 70-077-02)
•
PMK 300 projector mount kit (part number 70-374-01)
•
PMK 350 low profile projector mount kit (black, white) (part number 70-563-02, 03)
Follow the instructions included with the kit.
FOXBOX Tx/Rx HDMI • Reference Information
41