Extron Electronics FOX SW8 User Guide - Manual (Page 21)

FOX SW8 • Remote Control 15
6. Operate the switcher as follows:
• To select an input, click the associated input button.
• To mute the output, click the Mute Video checkbox.
WARNING: Risk of serious physical injury: The mute video checkbox
mutes the data on the switched output only. The output continues to emit
potentially dangerous laser light. The mute function has no affected on the
looped-through outputs.
• To toggle the front panel lock on and off, click the Lock button ( ).
• To bypass output reclocking or to select a data rate at which to reclock the
output, roll the mouse over the
Reclock Setting tab and then use the resultant
drop-down menu.
Firmware Upgrade
Firmware can be upgraded via the front panel Configuration port of the unit only, using the
Extron Firmware Loader utility from the Universal Switcher Control Program.
Upload replacement firmware as follows:
1. Visit the Extron website, www.extron.com , click the Download tab, and then click the
Firmware link (see figure 14).
3
2
3
1
1
NOTE: The name, version and
file size shown are
sample values only.
Figure 14. Location of Firmware Upgrade Files
2. Select the appropriate firmware file (FOX SW8) to download and click Download .
3. Enter the requested personal information and then click Download to copy the firmware
to your computer.