Extron Electronics FOX SW8 User Guide - Manual (Page 20)

FOX SW8 • Remote Control 14
Figure 12. Communication Setup Window
3. If necessary, select the tab, RS-232 or USB, for the port you are using for the
connection.
4. Depending on the tab that is selected, RS-232 or USB, select either:
• RS-232 tab — The Com port to which your switcher is connected
• USB tab — Extron USB Device_0
5. Click Connect . The Extron Universal Switcher Control Program window (see figure 13)
displays the selected video and audio input.
Figure 13. Universal Switcher Control Program Window