Extron Electronics DVI 201 User Guide User Manual

Page 6

There are two subsets of transmitters and receivers in two different enclosures or form
factors:

•

DVI 201 Tx/Rx — These units are housed in quarter rack width metal enclosures.
They can be set on a tabletop or mounted in a rack, under or through furniture, or to
a projector pole. The transmitter in this form factor has a local monitor output.

NOTE: The non-Decora models do not input, transmit, receive, or output audio.

•

DVI 201 A D Tx/Rx — These units are housed in enclosures that can be mounted
in UL standard wall boxes with Decora

-style face plates. These units also convert

computer level audio to balanced or unbalanced stereo audio.

NOTES: • A non-Decora transmitter or receiver is partially compatible with a

Decora receiver or transmitter.

• A mixed form factor system can transmit and receive video and RS-232

communications.

• A mixed form factor system cannot transmit and receive audio, as the

non-Decora models do not input, transmit, receive, or output audio.

DVI 201 Tx
non-Decora

Transmitters

Receivers

DVI 201 Tx
non-Decora

DVI video
Control

DVI 201 A D Tx
Decora

DVI 201 Rx
non-Decora

DVI 201 A D Rx
Decora

DVI 201 A D Tx
Decora

DVI 201 Rx
non-Decora

DVI 201 A D Rx
Decora

DVI video
Control

DVI video
Control
Audio (pass)

DVI video
Control

DVI video
Control
Audio (pass)

The units can be purchased as a pair (of the same form factor) or individually. Each
purchased pair and each individual transmitter is shipped with a single external desktop
12 VDC power supply that accepts 100 to 240 VAC, 50-60 Hz input. A single power
supply connected to either the transmitter or the receiver can power both units through
one of the TP cables that link the units.

NOTE: In this manual, the terms “DVI 201,” “DVI 201 Tx,” “DVI 201 Rx,”

“transmitter,” and “receiver” refer to the applicable unit in either form factor,
unless otherwise specified.

DVI 201 • Introduction