Reference information, Specifications – Extron Electronics DVI 201 User Guide User Manual
Page 34
Reference
Information
This section discusses the specifications, part numbers, and accessories for the DVI 201.
Topics that are covered, include:
•
•
•
Specifications
NOTES: • This product consists of a transmitter (DVI 201 Tx or DVI 201 A D Tx) and a receiver (DVI 201 Rx or
DVI 201 A D Rx) with twisted pair cables linking the transmitter and receiver.
• *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.
Also, an optional Extron HDMI-to-DVI adapter is required in order to transmit a CEC signal
Video
Maximum data rate 4 95 Gbps (1 65 Gbps per color)
Maximum pixel clock 165 MHz
Resolution range 1920x1200 or 1080p @ 60 Hz
Formats RGB and YCbCr digital video
Standards DVI 1 0, HDMI 1 2
Video input and loop through— transmitters
Number/signal type 1 single link DVI-D (or HDMI*) input
1 single link DVI-D (or HDMI*) local loop-through
Connectors
DVI 201 Tx 2 female DVI-D
DVI 201 A D Tx 1 female DVI-I
Interconnection between transmitter and receiver
Connectors 2 female RJ-45 per unit for 2 cables connecting the transmitter and receiver
Termination standards TIA/EIA T568A or T568B
Signal transmission distance
1920x1200 or 1080p @ 60 Hz
Extron DTP26 cable Up to 150' (45 m)
CAT 5/5e/6 STP Up to 125' (38 m)
CAT 5/5e/6 UTP Up to 100' (30 m)
1024x768 or 720p/1080i @ 60 Hz
CAT 5/5e/6 UTP or STP or Extron DTP26
Up to 200’ (60 m)
NOTE: The transmission distance varies greatly depending on the signal resolution and on the type of cable,
graphics card, and display used in the system.
DVI 201 • Reference Information
30