Xylem MULTI 3400 MULTI-PARAMETER METERS - Manual (Page 56)

Operation Multi 3400i
56
4.8 Configuration
You can adapt the handheld meter to your individual requirements. To
do this, the following parameters can be changed (the status on deliv-
ery is marked in bold):
Note
You can leave the configuration menu at any time with . The pa-
rameters that have already been changed are stored.
Baudrate
Baud rate 1200, 2400, 4800, 9600
Air pressure display Current value in mbar
(no input possible)
Calibration
intervals – pH 1 ... 7 ... 999 dInt 3
– O
2
1 ... 14 ... 999 dInt 4
– : 1 ... 180 ... 999 dInt 5
Date/time Any
1 Switch off the measuring instrument.
2 Press the key and hold it down.
3 Press the key.
The display test appears briefly on the display. The measuring
instrument then switches automatically to the setting of the
baud rate.
4 Select the required Baud rate with <
▲> <▼>.
5 Confirm with . CAL dISP appears on the dis-
play.
Day.Month No.
Time
1 2
M
m
% mg/l
cm
S/ cm
S
mbar
mV/pH
t n
Store Auto
LoBat
Tref25
nLF
/ K %
RCL
Sal
°
AR
TP
C
cm 1/
° F
ARng Cal Lin
Tref20
Sal TDS O UpH
AutoCal DIN
AutoCal TEC
Ident Year
0 0 8 4 Baud