Xylem MULTI 3400 MULTI-PARAMETER METERS - Manual (Page 13)

Multi 3400i Commissioning
13
3 Commissioning
3.1 Scope of delivery
z Multi 3400i handheld meter
z Plug-in power supply unit
z Operating manual and short operating manual
z 4 batteries, 1.5 V Mignon type AA (in the instrument)
For details of scope of delivery of SETs, see section 1.2 SET S OF
EQUIPMENT and WTW catalog.
3.2 Initial commissioning
Perform the following activities:
z Set the date and time
z Connect the plug-in power supply (optional)
Setting the date and
time
1 Press the key and hold it down.
2 Press the key.
The display test appears briefly on the display.
3 Press the key repeatedly until the date ap-
pears on the display.
4 Set the date of the current day with <
▲> <▼>.
5 Confirm with .
The date (month) flashes in the display.
6 Set the current month with <
▲> <▼>.
7 Confirm with .
The year appears on the display.
8 Set the current year with <
▲> <▼>.
9 Confirm with .
The hours flash on the display.
10 Set the current time with <
▲> <▼>.
11 Confirm with .
The minutes flash on the display.
12 Set the current time with <
▲> <▼>.