Xylem inoLab 7310_7310P WASTEWATER pH METER - Manual (Page 54)

Printer (only pH 7310P) pH 7310
54 ba75929e03 12/2011
10 Printer (only pH 7310P)
10.1 Commissioning / switching the printer on or off
Switching on the
printer
Switching off the
printer
1 Operating LED
– Illuminated: Printer is switched on
– Flashing: Printer is switched off
2 Control panel with the keys and
3 Lever to open the paper compartment
4 Lid of the paper compartment
2
1
3
4
1. Connect the power pack to the pH 7310 P.
The LED lights up green. The printer is ready for operation.
or
If the printer was switched off (LED flashing):
Switch on the printer with .
The LED lights up green. The printer is ready for operation.
If there is a USB connection (such as to a PC) the data are output
only to the PC.
1. Switch off the printer with .
The LED flashes. The printer is switched off.