Xylem inoLab 7310_7310P WASTEWATER pH METER - Manual (Page 44)

Settings pH 7310
44 ba75929e03 12/2011
7.3.2 Data storage
This menu contains all functions to display, edit and erase stored measured
values and calibration records (see section 8 D
ATA STORAGE
, page 46).
7.4 Reset
You can reset (initialize) all sensor settings and sensor-independent settings
separately from each other.
7.4.1 Resetting the measurement settings
The following settings for pH measurements are reset to the default settings
with the Reset function:
System / Interface /
Output header
Output of a header for Output
format
: CSV
System / Printer Settings for the integrated prin-
ter of the pH 7310 P.
For details, see section 10
P
RINTER ( ONLY P H 7310P),
page 54
System
/Clock
Date format
Date
Time
Time and date settings (see
section 4.4.6 E
XAMPLE 2 ON
NAVIGATION : S ETTING THE DATE
AND TIME , page 20)
System
/Service
information
Hardware version and software
version of the meter are dis-
played.
System /Reset - Resets the system settings to
the delivery condition (see sec-
tion 7.4.2 R
ESETTING THE SYS
-
TEM SETTINGS , page 45).
The calibration data are reset to the default settings together with
the measuring parameters. Recalibrate after performing a reset.
Setting Default settings
Buffer
AutoCalTEC
Cal. interval 7 d
Unit for slope mV/pH
Menu item Possible set-
ting Description