Xylem inoLab 7310_7310P WASTEWATER pH METER - Manual (Page 47)

pH 7310 Data storage
ba75929e03 12/2011 47
You have the following options:

To erase the entire storage, confirm Yes.
 To cancel the storage process and switch to the measured value display,
confirm No. Then you can e.g. transmit the stored data to a PC (see section
8.3.1 E
DITING THE MEASURED VALUE STORAGE , page 49) and subsequently
erase the storage (see section 8.3.2 E RASING THE MEASUREMENT DATA STOR -
AGE , page 51).
8.2 Automatic storage at intervals
The storage interval (Interval) determines the time interval between automatic
storage processes. Each storage process transmits the current dataset to the
interface at the same time.
Configuring the
automatic storage
function
1. Press the key.
The menu for automatic storage appears.
1 Adjusted entire storage duration
2 Max. available storage duration
3 Graphical display of the storage usage
1
ID number 1
Interval 30 s
Duration 180 min
Continue
0d03h00min
0 1d17h33min
Automatic data storage
01.07.2011
08:00
2
3
Back