LaMotte COD Plus Colorimeter 1922-EX2 - Manual (Page 44)

n
SELECTING THE NUMERICAL FORMAT OF THE RESULT
To input tests with very different ranges, the number of decimal places
displayed for a result can be selected. A test which ranges from 20 to 1000 ppm
should not be displayed with three decimal places. A test with a range from
0.010 to 0.500 needs three decimal places (the microprocessor will always
calculate the concentration to many more significant figures than will be
displayed). Menu choices of 0, 1, 2, or 3 decimal places will be given for the
display.
Use the
t button to scroll to Decimal Places
and press
Q/ENTER button to select.
EDIT USER TEST01
* New Calibration
Decimal Places
Select Units
Use the
t button to scroll to the number of decimal
places to be shown and press
Q/ENTER to select.
DECIMAL PLACES?
* None 0
One 0.0
Two 0.00
Three 0.000
The meter will display the message “Storing” and
return to the EDIT USER TEST01 menu.
Storing
EDIT USER TEST01
* Decimal Places
Select Units
44 COD PLUS COLORIMETER 6/02