LaMotte COD Plus Colorimeter 1922-EX2 - Manual (Page 27)

n
SEQUENCES OF TESTS
SEQUENCE 1 , SEQUENCE 2, and SEQUENCE 3 are alterable sequences. They
may be edited using the Editing Menu. Any of the LaMotte
pre-programmed tests or User Tests may be placed in these sequences in
whatever testing order that is preferred. Some examples of typical sequences are
given below.
SEQUENCE 1 SEQUENCE 2 SEQUENCE 3
* 004 Ammonia-N LF * 008 Cobalt * 001 COD LR
005 Ammonia-N LS 010 Cu Cuprizone 002 COD SR
006 Ammonia-N H 011 Cu - DDC 003 COD HR
007 Boron 015 Hydrazine
001 COD LR 016 Moly HR
002 COD SR 017 Nickel
003 COD HR 018 Ozone-LR
009 Color 021 Phosphate-H
013 DO 022 Potassium
014 Fluoride 023 Silica-Lo
018 Ozone-LR 024 Silica-Hi
020 Phosphate-L 027 Tannin
025 Sulfate-HR 029 Zinc-LR
026 Sulfide-LR
028 Turbidity
These alterable sequences allow a series of tests to be setup that are run
frequently. The order of the individual tests in the sequence is determined by
the user. After running a test, use the
t button to scroll to the next test and
press the
Q/ENTER button to select the next test in the sequence. Continue
this pattern until the entire sequence has been completed.
All Tests is a fixed sequence containing the LaMotte pre-programmed tests,
User Tests, and Absorbance tests.
Modification of the alterable sequences is accomplished through the Editing
Menu
. This menu is explained in greater detail in EDITING MENU (p. 32).
Pressing the
EXIT button while in a sequence menu will escape back to the
Testing Menu.
Pressing the
OFF button at any time will turn the colorimeter off.
COD PLUS COLORIMETER 6/02 27