LaMotte COD Plus Colorimeter 1922-EX2 - Manual (Page 39)

n
NAMING THE TEST
A User Test can be up to 11 characters long. The menu choices for each
character are 26 upper case letters A to Z, 26 lower case letters a to z, ten
numerals 0 to 9, a space (SP), a dash (-) and a decimal point (.). The existing
name is displayed on the bottom line of the display. A cursor will be over the
character which is to be edited and that character is also displayed in the
center of the display. The character can be changed by using the
t and s
buttons to scroll to other characters. Use the
Q/ENTER button to select a
character. The edited name is saved at any time by pressing
EXIT or by
pressing the
Q/ENTER button after selecting the eleventh character.
From the Edit User Test01 menu press the
Q/ENTER button to select Name The Test and
change the name of User Test 01
.
EDIT USER TEST01
* Name The Test
Select Vial/WL
New Calibration
Decimal Places
Select Units
The cursor is over the letter “U” in 105 User
Test01
and the letter “U” is displayed in the large
font in the center of the display.
NAME THE TEST
U
105 User Test01
Change the name to H2O. Use the
t and s buttons
to scroll to the letter “H” into the center of the
display. Press the
Q/ENTER button to select the
letter “H”.
NAME THE TEST
H
105 User Test01
The letter “H” has been entered in the first position
of the name and the cursor has moved to the second
letter “s”.
NAME THE TEST
s
105 User Test01
Use the
t and s buttons to scroll to the number
“2” into the center of the display. Press the
Q/ENTER button to select the number “2”.
NAME THE TEST
2
105 Hser Test01
Continued...
COD PLUS COLORIMETER 6/02 39