YSI ProODO - Manual (Page 11)

12 13
lanGuaGe
To change the instrument’s language setting,
highlight Language in the System menu and
press Enter. Highlight the desired language
and press enter to confirm. Languages include
English, Spanish, French, German, Italian,
Portuguese, and Norwegian.
radIx poInt
Radix Point allows the user to select between
a comma or a decimal in numeric radix point
for displayed values. For example, 1.00 becomes
1,00 when Use Comma is selected. Highlight
Use Decimal or Use Comma and press enter to
make your selection.
loGGInG
From the System menu, highlight Logging and press enter to view or change
the logging options. Logging options include Use Site List, Use Folder List,
Continuous Mode, and Interval.
Use Site List and Use Folder List are optional
ways of filing or ‘tagging’ your logged data
points. If these settings are enabled, you will
be prompted to select a Site and/or Folder to
‘tag’ to logged data points. See the File and Site
Lists section of this manual for information on
creating Site and Folder Lists.
Check the box for Continuous Mode if you
want to log samples continuously at a specific
time interval. To set the length of time between
logged samples, highlight Interval and press
Enter. Enter the interval as HH:MM:SS. This
interval will display at the top of the screen
when you select the Start Logging option in
run mode. If operating the unit in Manual
mode, see next section, the continuous logging
interval must be set to 10 seconds or greater in order to log data.
To log one sample at a time, uncheck Continuous Mode.
saMplInG Mode
The Sampling mode can be set to Automatic or Manual. In Automatic mode,
which is the default mode, the readings are
constantly updated. In Manual mode, the
readings are held or ‘locked’ on the display
once they reach the stability of the Auto Stable
setting in the Probe menu. The user must then
press a key to either log the held data or update
the measurements. Selecting Manual mode may
increase the instrument’s battery life. Highlight
either Automatic or Manual and press enter to
make your selection. If continuously logging in
Manual mode, the logging interval must be set
to 10 seconds or greater.