YSI MIQ/Blue PS Set - Manual (Page 7)

MIQ/Blue PS Overview
1 - 3 ba76095e02 01/2013
1.2.2 Instrument identification
The nameplate is on the side of the module enclosure. Among other, it
contains the following information (Fig. 1-3):
Fig. 1-3 Nameplate of the MIQ/Blue PS
ID number and encoding An MIQ/Blue PS SET consists of a module pair with the same ID num-
ber. Every module pair has its own coding of the radio transmission,
which is determined via the ID number. Any ID number is assigned only
once by YSI.This excludes the possibility of several module pairs hav-
ing the same encoding and thus, of interferences by a module pair that
happens to have the same encoding. With several MIQ/Blue PS pairs,
the ID number enables to identify which pair communicates with each
other.
Ser.-Nr. xxxxxxxxx
Power
!
OK
YSI
MIQ/
Blue PS
Netz / Mains Ausgang /Output
100...240 VAC 22 V DC
12 W 7 W
50 / 60 Hz
Eingang/Input Ausgang/Output
24 V DC 22V DC
24W 24 W
SENSOR NET / Input
24V DC 0,6W
ID-Nr: XXXX
Master
This device contains
FCC ID: PVH090202S
IC: 5325A-090202S
ID number of the module pair
Function:
Master or slave (here: master)