YSI NiCaVis 705 IQ - Manual (Page 57)

NiCaVis 705 IQ
Indexes
9 - 5 ba75950e01 03/2013
9.2 Status info
The status info is a coded piece of information on the current status of
a sensor. Each sensor sends this status info to the controller. The sta-
tus info of sensors consists of 32 bits, each of which can have the value
0 or 1.
Status info,
general structure
The bits 0 - 15 are reserved for general information.
The bits 16 - 21 are reserved for internal service information.
You obtain the status info:

via a manual query in the Settings / Service / List of all components
menu (see system operating manual)
 by an automated query
– of a superordinate process control (e. g. when connected to the
Profibus)
– of the IQ Data Server (see operating manual of the
IQ S
ENSOR
N
ET
software pack)
The evaluation of the status info, e.g. in the case of an automated
query, has to be made individually for each bit.
Status info
NiCaVis 705 IQ
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (general)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (internal)
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Status bit Description
Bit 0 Component hardware defective
Bit 1 Component hardware defective
xxx
Bit 2 Optical measuring range exceeded
Bit 3-31 -