YSI NiCaVis 705 IQ - Manual (Page 50)

Technical data
NiCaVis 705 IQ
8 - 2 ba75950e01 03/2013
8.2 Application conditions
Suitability and areas of
application
Municipal wastewater with a low proportion of industrial wastewater
Measuring medium:
Pressure resistance Sensor with connected SACIQ (SW) sensor connection cable:
The sensor meets all requirements according to article 3(3) of 97/23/
EC ("pressure equipment directive").
Type of protection Sensor with connected SACIQ (SW) sensor connection cable:
IP X8, 1 bar (10
5
Pa)
Immersion depth
Operating position Any
pH value 4 - 12
Flow rate < 3 m/s
Temperature 0 °C ... + 45 °C
(32 °F ... + 113 °F)
Max. allowed overpressure 105 Pa (1 bar)
min The measuring gap must be
filled with test sample.
max 10 m depth