YSI NiCaVis 705 IQ - Manual (Page 20)

Commissioning
NiCaVis 705 IQ
3 - 10 ba75950e01 03/2013
Measuring location Outlet (permanently set) Measurement location or application of
the sensor.

The possible measurement loca-
tions are displayed depending on the
currently set measuring mode.
 The sample matrix on which the cal-
culation of the measured value is
based changes with the location of
the sensor.
Measuring range - Display of the measuring range
(see chapter 8 T ECHNICAL DATA ).
Cal - # raw value 1 Value pairs of the user calibration (see section 4.3.2).
Note: Leave those values unchanged during the initial commission-
ing.
Cal - ref. value 1
Cal - # raw value 2
Cal - ref. value 2
Zero adjustment
Factory
User
Setting of which zero adjustment is
used in the sensor.

Factory zero adjustment or
 Zero adjustment carried out last
Signal smoothing

On

Off
Switching on/off the signal smoothing.
For more details, see Response time
t90 .
Menu item Settings Explanations