Acer Altos G520 - Manual (Page 60)

3 Upgrading the system 50
To install a hard disk into the cage
1 Remove the HDD cable cage from the chassis. Refer to the
instructions in the preceding section.
2 Remove the four screws that secure a previously installed hard disk
to the cage then pull the HDD out.
3 Install a new hard disk into the cage then secure it with the four
screws you removed in the previous step.
Note : Make sure the hard disk is tightened by screws on the cage.
4 Reinstall the HDD cable cage to the chassis. Refer to the
instructions in the subsequent section.
BB!H631!.!FO/cppl!!Qbhf!61!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN