Acer Altos G520 - Manual (Page 119)

109
Upgrading the BIOS
The upgrade utility allows you to upgrade the BIOS in flash memory.
The code and data in the upgrade file include the following:
• On-board BIOS, ATA-100 RAID BIOS, and PXE option ROMs for the
devices that are embedded on the system board
• The Setup Utility
• The System BIOS
Preparing for the Upgrade
The steps below explain how to prepare to upgrade the BIOS,
including how to:
• Record the current BIOS settings
• Obtain the upgrade utility
• Prepare a bootable diskette for the utility
In the unlikely event that a BIOS error occurs during the BIOS update
process, see "Recovering the BIOS" for instructions on performing a
BIOS recovery.
Recording the Current BIOS Settings
1 Boot the computer and press when you see the message:
Press Key if you want to run SETUP
2 Write down the current settings in the BIOS Setup program.
Note: Do not skip step 2. You will need these settings to
configure your computer at the end of the procedure.
Obtaining the Upgrade
Download the BIOS image file to a temporary folder on your hard
drive.
BB!H631!.!FO/cppl!!Qbhf!21:!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN