Acer Altos G520 - Manual (Page 55)

45
To install a hard disk into the carrier
Note: You need not remove the Hot Plut HDD cage from the
chassis to install a hard disk into the cage’s hard disk carrier.
1 Press the HDD release lever (1), then pull the hard disk carrier from
the cage (2).
2 Remove the four screws to open the hard disk carrier. Keep the
screws for later use.
3 When applicable, remove any previously installed hard disk.
BB!H631!.!FO/cppl!!Qbhf!56!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN