Acer Altos G520 User Manual
Page 130
4 BIOS setup
120
BIOS Select Jumper [J29]
Password Clear
6-7
If these pins are jumpered, administrator
and user passwords will be cleared on the
next reset. These pins should be
jumpered on 5-6 for normal operation.
BIOS Recovery
10-11
If these pins are jumpered, the system
will attempt to recover the BIOS by
loading the BIOS code into the flash
device from a floppy disk. This jumper is
typically only used when the BIOS has
become corrupted. These pins should be
jumpered on 9-10 for normal operation.
Operation
Pins
What happens at system reset...
Normal Boot
1-2
If these pins are jumpered, the board will
boot off of either BIOS (bank.0 or bank 1)
depending on which is available first.
Force Boot
2-3
If these pins are jumpered, the board will
boot off of bank 0 BIOS.
Jumper Name
Pins
What happens at system reset...
BB!H631!.!FO/cppl!!Qbhf!231!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN