Acer Veriton N2620G - Manual (Page 56)

56 | Connections
The Local Resources Section

Sound Redirection Options-By default, sound from the server will
redirect to the local thin client. If you do not want sound to be sent
to the local device, then select either the Do not play sound or
Leave sound on the remote thin client radio buttons below
Redirect sound to local device (selected by default).

Enable Printer Redirection-Mark this checkbox to redirect printing
to a printer attached the local terminal.

Enable Client Drive Mapping-Allows the user plug USB Flash
Drives locally into the terminal and access the contents of the drive
via the RDP session.

Enable Com Port Mapping-Redirects serial devices on your
terminal to the server.

Enable Smartcard Support-Specifies whether redirection of
Smart Cards is permitted during server authentication.
NOTE: To correctly set up Printing, make sure you have also entered fields in the Printer
Name and Driver Name fields in the Control Panel. This can be found in the Printer
section, under System Settings.