Acer Veriton N2620G - Manual (Page 23)

Virtual Appliance Installation & Setup | 23
10 Select [0] Exit at the next menu.
11 Press at each remaining prompt to use the default
settings.
12 When you return to the mssql/ODBC configuration menu,
configure the database name, IP address, port, and username
for your mssql database.
13 When finished, choose Keep Current Settings to accept your
settings and return to the Main Menu.
14 Select Restart Echo from the Main Menu to activate the database
connection.
Configure Acer Echo Management Console to Use MySQL Database
You can choose to connect to a MySQL database. To configure your
management server with your MySQL database:
1 Select Configure Database from the Main Menu.
2 Select Select and Configure a Different DatabaseMySQL.
3 Enter the appropriate values for the IP address, port, username,
password, and database fields that correlate to your MySQL
server.
4 Select Keep Current Settings and select OK. Press .
5 Select Restart Echo from the Main Menu to activate the database
connection.
Setting a Default Storage Location
You may find it beneficial to designate a default storage location for Echo
to store disk images and software packages. This is not mandatory,
however, as you can designate a location to store them individually as
you need, but it can save you some time if you set a default. To set a
default storage location:
1 Highlight Configure Default Storage Location from the Main
Menu and select OK.