AVSL 153.118 MMD-PC1 PC KIT - Manual (Page 7)

g Manual Programming Manual
5 PREV Select option backward.
6 NEXT Select option forward.
7 CAP Toggle between Capital letter and lower case character.
8 TIME To select time option. See Appendix B.
9 SPE
Select the display speed of the message. (Use PREV and NEXT to select
different speeds.)
10 FONT
Select the font size of the display message. (Use PREV and NEXT to select
different fo nt sizes.)
11 COL
Select the color of the display message. (Use PREV and NEXT to select
different colors of the display message.)
12 SYM Select 30 built-in symbols. (Use PREV and NEXT to select different symbols.)
13 CLR Erase option.
Select graphic option. (Use PREV and NEXT to select the following options:)
(a)GET GRAPH Place the graphic in the message. Use PREV and NEXT
to select GRAPH A to GRAPH P .
(b)MAKE
GRAPH
Create new graphics in location NUMBER A to NUMBER
H
14 GRA
(c)EDIT GRAPH Edit GRAPH A to GRAPH P and store in one of the
location of NUMBER A to NUMBER H.
15 <= Moving the message and command to the right.
16 >= Moving the message and command to the left.
17 ALT
Note:
IF YOU WANT TO DELETE MESSAGE OR COMMAND IN THE EDIT
PROGRAM MODE.PLEASE USE ABOVE KEYS TO MOVE THAT MESSAGE
OR COMMAND TO THE LEFT-MOST POSITION AND PRESS DEL .
IF YOU WANT TO INSERT MESSAGE OR COMMAND IN THE EDIT
PROGRAM MODE.PLEASE USE ABOVE KEYS TO MOVE THAT MESSAGE
OR COMMAND TO THE LEFT-MOST POSITION AND (1)PRESS INS TO
INSERT.(2)TYPE IN YOUR MESSAGE OR PRESS COMMAND KEY,IT WILL
INSERT AUTOMATICALLY.(3)PRESS INS AGAIN TO OVERWRITE.
18 PAU
Generate a pause within the programmed message. (Use PREV and NEXT to
select PAUSE 1 to PAUSE 8)
19 PHR
Select a programmed animation in the message. (Use PREV and NEXT to
select ANIM 1 to ANIM 8)
20 BEEP
Select beep sound in the message. (Use PREV and NEXT to select BEEP 1 to
BEEP 3)
21 ENT Accept the selected option.
22 ESC Return to the upper manual in the edit program mode.
23 INS Refer to 15 and 16
24 DEL Refer to 15 and 16
25 SPA Insert space in message.
26 RUN
(1) In edit program mode, press RUN to save and run the current message.
(2) In display mode, press RUN and enter 01 to 99 to select other messages
for display.
－
Page7
-